|
Welcome to Martin Stone GRP glass fibre swimming pool lining and repair specialist contractor.
MS GRP are specialists in fibreglass lining swimming pools and other applications that require a high specification structural watertight finish, we particularly specialise in the lining of swimming pools where the liner or paint or tile finish has failed , where the swimming pool is leaking and a competitively priced solution or alternative to an existing finish is required.
We offer a Swimming pool lining installation and repair service to the swimming pool trade, local councils, schools and private customers; we have many years of experience and we can provide our service across all parts of the Uk and Europe.
Our product is a structural lining that moulds itself to the shape of your pool, it is composed of a combined glass fibre compound and plastic resin that when set hard will bridge cracks, seal joints and bodged repairs, making a watertight structurally strengthened chemical resistant ceramic like finish to any application requiring a high standard fibreglass reinforced finish we only use Lloyds approved high grade materials, and all our work is done under cover ensuring a clean and dry environment ensuring the material is properly cured and not not degraded by exposure to the elements during the curing process , covering also ensures a fixed start to finish programme unhindered by weather, we believe this is a very important aspect of our service not offered by any other contractors.
An average domestic pool can be completed within a week.
Unlike drop in or on site vinyl swimming pool linings our product is bonded to the pool ,this prevents slippage and wrinkles forming, a common problem with vinyl, in addition our product is seamless, whereas on site vinyl linings are welded together producing ugly seams at every contour of the pool and potential leak points ours is a one piece application, using your pools shape as a mould, our product is guaranteed to stop leaks in swimming pools with a 100% success rate.
Fibreglass will last for decades, modern GRP materials are made with tough conditions in mind, such as boat hulls and acid tanks, when its applied to an integrally strong structure such as a swimming pool it will last as long as the structure does, even enhancing the strength of the structure, a fibreglass lining cannot be easily torn or ripped or punctured, Modern finishing flowcoats will last well in excess of 15 years , if after all this time your pool requires a fresh coat to make it look like new again this can be carried out at a fraction of the cost of a new lining, or costly replacement of an on site vinyl system.
A range of colours are available for swimming pools and each pool can be individually finished with one of our mosaic designs, giving it a finishing touch that will enhance the look and have the benefit of hiding the “tide mark” on the pool at surface level from sun tan oils and dirt that can occur after heavy use.
These mosaics are printed onto a tissue and are laminated to the pool during the lining process, once cured they are smooth and easy to wipe clean.
All our work is done under cover ensuring a high quality properly cured finish and a fixed start to finish duration with no delays by bad weather.
We also have a service where we undertake repairs to fibreglass pools, pre moulded pools or damaged fibreglass linings.
Please go to our gallery to see examples of finished pools, or our process page to find out more about the lining process.
|
